Skip to content
Owner-operated in San Bruno

Maintenance | Learn

What Happens During a Heating or AC Maintenance Visit?

Published by Pacific Sustainable Heating & Air | Last updated November 17, 2026

Short answer

A typical maintenance visit checks that the system is running safely and as designed: filter, thermostat, wiring connections, airflow, the condensate drain, coils, and for gas furnaces the burners, ignition and venting. The goal is to catch small problems before they become breakdowns.

What is typically checked

Exact steps vary by equipment, but a maintenance visit usually covers the parts that most often cause trouble.

  • Air filter condition, and replacement if needed.
  • Thermostat operation and settings.
  • Wiring connections, capacitors and contactors.
  • Blower and fan operation.
  • Condensate drain line and pan.
  • Indoor and outdoor coil condition.
  • Refrigerant system operation on air conditioners and heat pumps.
  • On gas furnaces: burners, ignition, flame sensor, heat exchanger and venting.

Why it is worth doing

Many breakdowns start as something small: a weak capacitor, a clogged drain or a dirty flame sensor. Catching those during a scheduled visit is easier than finding them when the system stops on the coldest or hottest day.

How is a heating visit different from a cooling visit?

Heating and cooling visits share many steps, such as the filter, the thermostat, the wiring and the blower. The difference is where the extra attention goes.

On a gas furnace, the focus is on safe burning and venting. That means the burners, the ignition, the flame sensor and the path combustion gases take out of your home.

On an air conditioner, the focus is on the cooling side: the coils, the condensate drain, the outdoor fan and how the refrigerant system is working. A heat pump does both jobs, so its visit looks at heating and cooling operation.

When is a good time to schedule a visit?

A simple habit is to have the heating side looked at before the weather turns cool, and the cooling side before warm weather arrives. That way, a problem shows up while you still have time to deal with it.

The San Francisco Peninsula has a mild climate, so it is easy to forget about the system until you need it. Planning ahead keeps you from finding a problem on the first cold night or the first warm afternoon.

How can you prepare for the visit?

A little preparation helps the visit go smoothly and makes sure your concerns get covered.

  • Make sure the indoor unit, the outdoor unit and the thermostat are easy to reach.
  • Find your equipment paperwork, if you have it, so the model details are on hand.
  • Write down any problems you have noticed, even ones that come and go.
  • Note which rooms feel too warm or too cold.
  • Keep pets in another room while the equipment is open.

What can a maintenance visit not do?

A tune-up checks how the system is running. It does not make an old system new, and it cannot stop every part from wearing out over time.

If something is found, it should be explained in plain terms so you can decide what to do. A worn part may need repair now, or it may simply be something to watch.

Some problems, such as damaged ductwork or a system that was never sized well for the home, go beyond what a tune-up can fix. Those call for a separate conversation.

Is a smell normal when the heat first comes on?

A faint dusty smell the first time the heat runs for the season is common. Dust that settled inside the furnace burns off, and the smell should fade soon after.

A burning smell that does not fade is a reason to turn the heat off at the thermostat and have it checked. If you smell gas, leave the house right away without touching switches, then call PG&E or 911 from outside.

How to get the most from a visit

  • Mention any noises, smells or uneven rooms you have noticed.
  • Ask what was found and what, if anything, should be watched.
  • Keep a simple record of each visit with your equipment paperwork.

Common questions

01 How often should a heat pump be serviced?

A heat pump runs in both heating and cooling seasons, so regular service matters. Your equipment manual gives the recommended interval.

Next steps

Terms in this guide

Still have questions about your system?

We look at your home and explain the options in plain language.

Keep reading

More from the Learning Center

Owner-operated in San Bruno

Talk to us about your home

Call Pacific Sustainable Heating & Air, or send a request and we will get back to you.