Who Tunes Up Heating Systems on the San Francisco Peninsula?
Pacific Sustainable Heating & Air tunes up heating systems across the San Francisco Peninsula and can check your heating system before cold weather. If your furnace shuts off soon after it lights or some rooms barely get warm air, small problems like a dirty flame sensor or a clogged filter can lead to a shutdown if ignored.
How Do I Know My Heating System Needs Maintenance?
Why Is My Warm Airflow Weak?
Weak warm airflow from the registers may mean the blower is working against a restriction, such as a dirty filter or a blower wheel packed with dust.
Why Is My Heating Bill Creeping Up?
A heating bill that is higher than at the same time last year, with no change in your habits, may mean dirty or worn parts are making the system run longer to reach the same temperature.
Why Do My Furnace Burners Shut Off After Lighting?
Gas furnace burners that shut off within seconds of lighting often point to a dirty flame sensor that can no longer detect the flame, so the control board shuts them off. The furnace then tries again, over and over. Cleaning the sensor is a routine maintenance item.
What Does Furnace Squealing or Rattling Mean?
Squealing or rattling from the furnace can point to worn motor bearings or a loose or unbalanced blower wheel, which are easier to deal with before they fail.
Is a Boom When the Burners Light a Repair or a Tune-Up?
A loud boom when the burners light is a repair, not a tune-up, because it can mean delayed ignition, a safety problem. Turn the heat off at the thermostat and have it repaired before using it again. If you smell gas, leave the house right away without touching switches, then call PG&E or 911 from outside.
What Does a Heating Tune-Up Generally Cover?
A typical heating tune-up checks the filter and thermostat, the power draw on the blower motor, the capacitors and the safety switches. On a gas furnace it covers the burners, ignition, flame sensor and venting, along with a check of the heat exchanger for cracks. On a heat pump or ductless system, it confirms the refrigerant cycle is operating properly in heating mode.
You work directly with the owner, who has more than 23 years as a union service technician.
Heating Maintenance Across the Peninsula
We provide heating tune-ups for homes in the following communities.
San Francisco Peninsula: San Bruno, San Francisco, San Mateo, Burlingame, Redwood City, Palo Alto
Related Services
When a heating maintenance visit shows that an aging furnace is beyond cost-effective repair, especially if it turns up a cracked heat exchanger, we can talk through furnace replacement or a heat pump. Peninsula Clean Energy and BayREN offer heat pump incentives to eligible San Mateo County customers; eligibility and funding vary. For your cooling system, see air conditioning maintenance.
When Should I Schedule Heating Maintenance?
Schedule heating maintenance before the heating season, when a tune-up is a simple way to catch small problems early. Call (415) 654-1160 or request an estimate to schedule heating maintenance with Pacific Sustainable Heating & Air.