Skip to content
Owner-operated in San Bruno

Heat Pumps

Heat Pump Installation and Replacement in San Bruno

A heat pump outdoor unit beside a home with the Peninsula hills behind it

A heat pump both heats and cools your home with a single electric system. If your home has an aging gas furnace and no central cooling, a heat pump can replace the furnace and add cooling in one system.

Pacific Sustainable Heating & Air is owner-operated: you work directly with the owner, who has more than 23 years as a union service technician. We look at your home, your existing ductwork and your power supply before recommending anything, so the system fits the house you actually have.

What this involves

We install and replace residential heat pumps. A heat pump moves heat rather than burning fuel, which is why one system can keep a home warm in winter and cool in summer.

Whether a heat pump is a good fit depends on the home, the ductwork and the main panel. We walk the home, check what is there now, and explain the options in plain language before any work is scheduled.

New equipment is moving to lower global-warming-potential refrigerants such as R-454B and R-32. Existing R-410A systems can still be serviced.

  • Residential heat pump installation and replacement
  • One system for both heating and cooling
  • Options explained before work is scheduled
  • Work focused on the San Francisco Peninsula

When to reach out

  • Aging equipment. Your furnace or air conditioner is old and you are weighing a replacement.
  • No cooling. The home has heat but no central cooling and you want to add it.
  • Electrification. You want to move off gas heating toward an electric system.

Who Installs and Replaces Heat Pumps on the San Francisco Peninsula?

Pacific Sustainable Heating & Air installs and replaces heat pumps across the San Francisco Peninsula and can help you stop the endless repair cycle with options suited to your home. Are you tired of paying for band-aid repairs on an aging system that still leaves your living room feeling like a damp cave, or watching your energy bills spike while an old gas wall heater struggles to keep up? Replacing a failing, inefficient unit is a major decision, but constantly throwing good money at a dying system will only cost you more in the long run.

How Do I Know It Is Time to Replace My Heat Pump?

Is My Heat Pump Becoming a Money Pit?

A heat pump becomes a money pit when you are paying for repairs several times a year to replace capacitors, top off refrigerant, or fix wiring problems on an older system. The core components, specifically the compressor and the reversing valve, are degrading and causing an escalating cascade of secondary part failures. You end up paying for a new heat pump in installments through temporary repairs, only to still have an unreliable unit that is likely to break down for good.

Why Does My Heat Pump Run Constantly but Blow Lukewarm Air?

A heat pump that runs constantly but blows lukewarm air usually has a severe loss of refrigerant from a heavily corroded coil, or a compressor that has lost its pumping capacity entirely. The air is room temperature at best and the house never reaches the temperature you set on the thermostat. Beyond the lack of comfort, running a compromised system continuously can overheat the compressor and burn out the blower motor while driving up your utility bills.

What Do Metal-on-Metal Noises From My Heat Pump Mean?

Metal grinding, loud screeching, or heavy banging from a heat pump's outdoor unit can mean the compressor's internal bearings are failing, the fan motor is seizing up, or internal hardware has snapped under the strain of age. The noise may vibrate through the walls of your home. Modern heat pumps are designed to run quietly, so violent noises usually mean a major failure is close and the system may soon lock up entirely.

Why Is My Heat Pump Costing More to Run?

A worn heat pump costs more to run because, as components wear out and coils get restricted, it loses efficiency and has to pull more amperage while running longer to achieve the same heating or cooling. Your utility bills jump compared to the same time last year, even though your thermostat habits have not changed at all. Replacing a worn-out system with a modern, variable-speed heat pump can cut down on that wasted energy.

Why Does My Heat Pump Keep Tripping the Breaker?

A heat pump that routinely trips the breaker when it starts may have a failing compressor that pulls a large surge of power as it struggles to turn over, exceeding the safe limits of the circuit. Each trip leaves you suddenly without climate control. Resetting the breaker is not a fix; it is a warning that the power draw of your system is too high and needs attention.

What Usually Leads to Heat Pump Replacement?

Can a Heat Pump Replace My Gas Furnace?

A heat pump can take the place of an aging gas furnace or wall heater as your home's main source of heating and cooling. If your home has no central air conditioning, a heat pump offers an efficient way to get both reliable heating and cooling in one unified system.

Should I Replace the Compressor or the Whole Heat Pump?

After a catastrophic compressor failure, the lasting solution is often a full heat pump replacement with a modern, more efficient unit. While a compressor can technically be replaced, putting a brand new compressor into an old, degraded system is rarely cost-effective or reliable. After many years of pumping refrigerant, pulling heavy loads, and enduring moisture, the compressor's internal windings can short out or the valves can fail.

What Should I Do if My Old System Uses R-22?

If your older heat pump or air conditioner uses R-22, a refrigerant that has been phased out due to environmental concerns, recharging it after a leak is often hard to justify because R-22 is scarce. Instead of putting money into obsolete refrigerant when the evaporator coil leaks, we can replace the entire system with a modern heat pump that uses a current refrigerant.

What Happens When a Heat Pump Is the Wrong Size?

A heat pump that is the wrong size is either too small to condition the space or so large that it short-cycles constantly. An oversized unit blasts the house with air, shuts off before removing humidity, and wears out its contactors prematurely. Some older systems were installed without proper load calculations. A replacement is a chance to size the new heat pump to your home for steady comfort and a longer equipment life.

What Happens During a Heat Pump Replacement Consultation?

A heat pump replacement consultation looks at the big picture: whether your panel has the capacity for the new equipment, and whether your existing ductwork can support the airflow a modern system needs. When you call Pacific Sustainable Heating & Air, you work directly with the owner, who has more than 23 years as a union service technician.

You should come away understanding your equipment options and what the installation will involve. Peninsula Clean Energy and BayREN offer heat pump incentives to eligible San Mateo County customers; eligibility and funding vary.

A heat pump installation involves recovering the old refrigerant, removing the failing units, installing the new system, and testing the airflow and power draw. You should also know how to operate your new thermostat for efficient everyday use.

Heat Pump Installation & Replacement Coverage Across the San Francisco Peninsula

Our service area covers communities on the San Francisco Peninsula within about 25 miles of San Bruno. When it is time to upgrade your home's HVAC system, we are glad to talk through your options.

San Francisco Peninsula: San Bruno, San Francisco, San Mateo, Burlingame, Redwood City, Palo Alto

Related Services

Ductless mini split installation can be an efficient alternative if your home lacks the ductwork required for a traditional central heat pump, or if you want to create distinct temperature zones in different rooms. If you are looking to stick with natural gas heating but need to upgrade a failing system, we also offer furnace installation and replacement to keep your home comfortable year-round.

How Do I Stop the Heat Pump Repair Cycle?

You can stop the repair cycle by replacing an aging, failing heating and cooling system instead of sinking more money into endless repairs. Living with that system means dealing with constant noise, lukewarm air, and unpredictable energy bills, and you do not have to settle for a home that never quite feels comfortable.

Talk with us about what your home needs. Request an estimate to start exploring your heat pump replacement options.

Questions

01 Is a heat pump a good fit for my Peninsula home?

It depends on the home, the existing ductwork and the power supply. We look at your home and explain the options before recommending anything.

02 Does a heat pump both heat and cool?

Yes. A heat pump provides heating in colder weather and cooling in warmer weather from a single system.

03 Can you replace my gas furnace with a heat pump?

In many homes, yes. We check the ductwork and power supply first so the recommendation fits your home.

Owner-operated in San Bruno

Ready to talk about Heat Pump Installation & Replacement?

Call Pacific Sustainable Heating & Air, or send a request and we will get back to you.