Skip to content
Owner-operated in San Bruno

Ductless Mini Splits | Compare

Is a Ductless Mini Split Right for Your Home?

Published by Pacific Sustainable Heating & Air | Last updated November 17, 2026

Short answer

A ductless mini split is a good fit for rooms or homes without ductwork, additions, converted garages and ADUs, and rooms that are always too warm or too cold. Most are heat pumps, with one or more indoor units mounted in the rooms, connected to an outdoor unit by a small line set.

How a mini split is put together

An outdoor unit connects to one or more indoor units through a line set that carries refrigerant, power and a condensate drain. The line set passes through a small opening in the wall, so no ductwork is needed.

Each indoor unit has its own controls, so each room or zone can be set to its own temperature.

Where ductless makes the most sense

  • Homes with no ductwork, or ductwork in poor condition.
  • Additions, converted garages, ADUs and bonus rooms the main system does not reach.
  • A room that is always hotter or colder than the rest of the house.
  • Homes where you want to heat and cool only the rooms in use.

Things to weigh

Indoor units are visible on the wall or ceiling, so placement and appearance matter. Each unit has a filter that needs regular cleaning. For a whole home, the number of rooms and the layout decide whether ductless, ducted or a mix is the better fit.

What types of indoor units are there?

Indoor units come in a few styles. Which one fits depends on the room, the structure around it and how much you want the equipment to show.

  • Wall-mounted: set high on a wall, the familiar choice for single rooms.
  • Ceiling cassette: set into the ceiling so mainly a grille shows, with air spreading in several directions.
  • Floor-mounted: set low on the wall, useful under a window or in a room with a sloped ceiling.
  • Concealed duct: hidden in a ceiling or closet, sending air through short ducts to nearby rooms.

Should you choose single-zone or multi-zone?

A single-zone system pairs one outdoor unit with one indoor unit. It suits one room or one open area, such as an ADU or a converted garage.

A multi-zone system connects several indoor units to one outdoor unit, and each zone keeps its own controls. Fewer outdoor units can be simpler for the outside of the house, but the layout and the distance between rooms affect what works.

What does installation involve?

A typical installation includes mounting the indoor unit, setting the outdoor unit on a pad or wall bracket, running the line set through a small opening in the wall, and setting up the condensate drain so water from the indoor unit flows away. Your power supply also needs room for the new equipment.

Because there is no ductwork to build, the work is usually less disruptive to the home than adding ducts.

Can a mini split work alongside your current system?

Yes. Some homes keep a central furnace or heat pump for the main living space and add a mini split for an addition, an ADU or one problem room.

The mini split runs on its own controls, so it does not change how the main system works. That can be a practical way to fix a hard-to-heat or hard-to-cool room without replacing everything.

Common questions

01 Does a mini split heat as well as cool?

Most do. The majority are heat pumps, so they provide both heating and cooling.

02 How often do mini split filters need cleaning?

Check the filters in the indoor units regularly and clean them when they look dusty. The equipment manual gives the recommended interval.

Next steps

Terms in this guide

Still have questions about your system?

We look at your home and explain the options in plain language.

Keep reading

More from the Learning Center

Owner-operated in San Bruno

Talk to us about your home

Call Pacific Sustainable Heating & Air, or send a request and we will get back to you.